Sunday, October 04, 2009

HomeEasy Meets Arduino - HomeEasy Automatic Protocol

After several late nights on this one, I've finally cracked it.
Thanks to Barnaby and Peter's postings on Arduino.cc I've managed to build an Arduino sketch that will send On/Off signals to a HomeEasy HE302 socket via a little 433 mhz transmitter.

This code takes a HE device code (6 digits) and sends an on signal, then an Off signal.

Code is here, If you want to build this, you just need a little Arduino board, and the 433mhz transmitter I talk about in earlier posts.
Now, go forth and build my friends 8-)